You've convinced me not to worry about future 3D technology and to just get a 3D TV now. I'm finally about to go to the store, but instead of getting the Samsung UA46D7000 LED LCD, I'm going to get the Samsung PS51D8000 plasma, a cheaper yet larger and higher-end model. My one concern is that, since the PS51D8000 is a plasma, do I need to break it in? I know you do it all the time for reviews, but I've read that Samsung has said that it's unnecessary anymore. So should I break it in, just be careful for the first 100 hours, or not worry at all?
I have a problem with my dedicated home theatermy center channel doesn't always sound clear. I've heard other systems whose dialog is crystal clear, but mine isn't. My system includes Klipsch speakers (RF-83 fronts, RC-64 center, RB-81 rears), two Velodyne DD-15 subwoofers with SVS AS-EQ1 equalizer, Anthem Statement P5 5-channel power amp, and Integra DHC-9.9 pre/pro. I've attached a photo of where my center-channel speaker sits, plus another one of the front of the theater. Any advice would be appreciated.
I have a Samsung 46-inch LCD TV, Onkyo TX-NR509 A/V receiver, and KLH HT-60 speakers. I just got the Onkyo, and now I'd like to upgrade my speakers. I am considering the Energy Take Classic 5.1 system as well as the Pioneer SP-PK21BS speakers, but the Pioneers seem a bit large for my room (25x14 feet with a viewing distance of 10 feet). Also, the Pioneer's center speaker is so high, it would block the bottom portion of my screen.
I have a Yamaha RX-V2400 A/V receiver driving a set of Boston Acoustics VR2 towers and a Boston PV1000 subwoofer. My question is what crossover, if any, should I set on the front of the subwoofer? It has three controlsa selector switch with 50, 80, 120, and 150Hz; Crossover Set or None; and Polarity None or 180. I did not get a manual because it was a floor model. My bass sounds odd and it is bothering me.
Thanks for your amazing podcast; I've been an avid listener since episode 1. I was wondering if you could spend some time on the topic of ultra-widescreen projectors and 21:9 TVs. There are very few products of the sort, and many people spend a small fortune on anamorphic lenses, stretching processors, and such. Why are there no native 21:9 projectors out there? Ninety percent of my viewing is in 2.35 and above, and I always have black bars on the top and bottom. In my mind, 16:9 is the new full screen. What's coming down the road ahead?
I just bought a refurbished Audiovox 5.1 home-theater-in-a-box made in 2002 for $144 (original price $299). I can still return it and wonder if there is a better option at this price point. I found a refurbished Onkyo HT-S3300 for about $300 and wonder if it is worth the extra $150? I have a new LG 42-inch flat-panel LCD TV in a medium-size family room. I have no idea if the Audiovox for $144 is a good deal or not. I couldn't care less about Blu-ray or 3D, but I want good sound. Can you give me any tips or suggestions?
I have two plasma TVs, an older Philips 1080i/720p and a newer Panasonic 1080p. I have Verizon FiOS with HD DVR that lets me choose 720p or 1080i output. Which should I choose for the best picture for watching sports? I seem to remember reading somewhere that 720p is best for sports and 1080i is better for movies, but I'm not sure if that still holds true.
Also, I'm considering getting a new 1080p set, and I see you have the Panasonic TC-P50ST30 rated as one of your Top Picks. I can get a good deal on the 60-inch version of this TV and was wondering if your review holds true for that size. I see you review a lot of 50-inch TVs, but not the 60-inch versions. Do the 60-inch versions lose picture quality because the screen is 10 inches bigger with the same number of pixels? Do they just make the pixels bigger?
Can you recommend a TV for a small living room? The room is 18 feet wide, and current viewing distance on a standard-definition 35-inch TV is about 12 feet. I'm looking at the 42-inch size range for $1500 or less. I think I need an LCD TV with 120 or 240Hz refresh rate; I watch a lot of sports, and I'm not sure that 120Hz would be enough. Also, I think I want an Internet connection as well. I know from listening to you that this can update the TV, but can it access shows like what Leo Laporte and you do on twit.tv?
I have an LG 55LW5600 TV and an LG 3D Blu-ray player in a 13.5-by-16 room. The TV is on the long side of the room, so the placement is not optimal, but it allows me to maintain the peace with my better half.
Now, I need a sound system. I think the Onkyo HT-S9400THX system offers good value. Do you like how that system sounds? On the other hand, a large retailer is selling the Polk RTi A5 and RTi A7 at $519 and $629 per pair, respectively. That seems like a good deal, but I would still need a receiver (I'm considering the Pioneer VSX-1121) and a center channel; I do not have a lot of space for surrounds in the back of the room as the couch is against the wall. Would the Polk setup sound just as good with two speakers (say the A7s) versus the Onkyo 7.1 system, considering that it might just be 5.1 or 3.1)? In two or three years, I will develop the basement and move the home theater downstairs to a larger room. Would the Polks be a better long-term investment?
I am in the process of upgrading my home theater. I just bought the Panasonic VT25 plasma TV and Marantz SR6006 A/V receiver, and I want to get the right speakers. I bought the B&W CM2 center channel, so my challenge is now the in-ceiling speakers. I am considering Martian Logan, B&W, and Current in-ceiling speakers. If I stay with the B&W center, should I go with B&W in-ceiling?
The Martin Logans cover more of the highs, while the B&Ws cover more of the midrange. With music, the B&Ws sound more realistic, but with movies, the Martin Logans sound better. I was told that matching manufacturers is key to maintain the same tonal character. If I don't, will there be an impact to movies and music? Any feedback on these speakers in general and/or matching manufactures would be very helpful. I am willing to go listen to other speakers that you suggest.
Four years ago, I purchased a high-end Arcam AVR350 A/V receiver without a good understanding of the future. Now I want to take advantage of the new lossless audio formats offered on Blu-ray from my new Oppo BDP-95 player. I can connect the multichannel analog output of the Oppo to the Arcam's multichannel input, but I am concerned about bass management, equalization, and lip sync. Can an amateur do the adjustments recommended or is a professional needed? Also, I am questioning my recent decision to repair my AVR350, which had a power-supply issue (it cost $400 to repair). Should I have bitten the bullet and scrapped this $2700 clunker for a newer receiver? It's a hypothetical question because now I don't have the funds to buy both a high-end receiver and high-end Blu-ray player. Any thoughts?
My home-theater system consists of a Sony STR-DB940 A/V receiver with 5.1 speaker setup, Sony KDL-52HX909 LED/LCD TV, Dish Network HDTV receiver, and Sony SLV-N71 Hi-Fi VCR. I have the VCR connected to the TV via composite video and L/R analog audio cables and the TV's audio output connected to the AVR via optical cabling (MD/DAT input). I have the Dish receiver's video connected to the TV via HDMI and its audio connected to the A/V receiver via optical (SAT/TV input). All of this worked great for about nine months until a few weeks ago.
The AVR's SAT/TV input works fine, but when I use the MD/DAT input for watching the TV or VCR, the sound only comes out of the left-front speaker. When I record something via the VCR's line in, the playback has the same audio problem. But when I play a tape recorded over a year ago, the sound does not have the audio problem.
I am looking for a new A/V receiver, and I am seriously considering the NAD T 747 and the Onkyo TX-NR709. It will be used about 75 percent for movies and 25 percent for music. The features I'm looking for include at least 5.1 (if not 7.1), auto room calibration/set-up (such as Audyssey), the ability to decode all the new lossless formats found on Blu-rays, the ability to make movie dialog easier to hear when listening at low volume levels, and pre-out jacks so that I have the option of hooking up a separate amplifier to it in the future.
The reviews of the GoldenEar SuperCinema 3 (seen in the lower portion of the image above) and Morel SoundSpot Music Theatre 2 Ultra speaker systems came out at roughly the same time. The Morels appear to have better performance and build quality according to their ratings, and yet they are not considered as good a value despite being in essentially the same price category. Do the Morels really sound better, or is their sound measured against how tiny they are?
I have the opportunity to update my home theater audio system and have decided on the Marantz SR7005 AVR. My room is small, and when I remodeled 10 years ago, I installed four Paradigm in-wall speakers and a large center-channel speaker for my 5.1 system. It occurs to me that if I replace the center channel with a 3-channel soundbar, I could use my existing in-wall speakers for the surround and have a full 7.1 system.
What do you think of this approach? Paradigm makes a 3-channel soundbar, the Millenia 20 Trio (shown above). I like my Paradigm speakers, but I thought that looking at other brands might be a good thing to do.