SVS PB16-Ultra and SB16-Ultra Subwoofers Review Test Bench

Test Bench

SVS PB16-Ultra Subwoofer
This graph shows the quasi-anechoic (employing close-miking of the woofer) frequency response of the PB16-Ultra subwoofer (blue trace).

117svs.pb16meas.jpg

The PB16-Ultra’s close-miked response in Extended mode, normalized to the level at 80 Hz, indicates that the lower –3dB point is at 15 Hz and the –6dB point is at 13 Hz. The upper –3dB point is at 156 Hz using the LFE input.—MJP

SVS SB16-Ultra Subwoofer
This graph shows the quasi-anechoic (employing close-miking of the woofer) frequency response of the SB16-Ultra subwoofer with controls at default (blue trace), and with the parametric EQ set to +5dB at 20 Hz (green trace).

117svs.sb16meas.jpg

The SB16-Ultra’s close-miked default response, normalized to the level at 80 Hz, indicates that the lower –3dB point is at 27 Hz and the –6dB point is at 19 Hz. The upper –3dB point is at 174 Hz using the LFE input.

With EQ engaged, normalized to the level at 80 Hz, the lower –3dB point is at 16 Hz and the –6dB point is at 14 Hz.—MJP

Editor's Note: Using our standard practice of preforming quasi-anechoic measurements at a subwoofer's default settings, the SB16-Ultra failed to meet the manufacturer's claimed low-end frequency specification (blue trace). However, it did so handily with an adjustment to the unit's own integrated EQ (green trace). Users should be able to compensate similarly in their own rooms.—Rob Sabin

COMPANY INFO
SV Sound
(877) 626-5623
ARTICLE CONTENTS

COMMENTS
dmusoke's picture

Nice reviewer of these 2 awesome subs. A first I believe with technical measurements.

How do you explain the difference in the -3dB points between what you measured (Closed-mic) and what SVS states using the 2m ground plane technique?

Even the high-end is off. SVS claims 3dB at 460Hz and you measured significantly lower.

dmusoke's picture

What PEQ setting did you use, including Q values?

dmusoke's picture

I forwarded this review to Ed Mullen from SVS and pasted his response is on SB16/PB16 AVS forum at:

http://www.avsforum.com/forum/113-subwoofers-bass-transducers/2602833-sv...

In short, the measurement technique used in this review are not correct.

Tommytom83's picture

SO how did the HSU compare to the SVS? Worth the extra money or better off with to Hsu subs?

X