Focal Electra 1028 Be Speaker System HT Labs Measures

HT Labs Measures

L/R Sensitivity:91 dB from 500 Hz to 2 kHz
Center Sensitivity:90.5 dB from 500 Hz to 2 kHz
Surround Sensitivity:88 dB from 500 Hz to 2 kHz

This graph shows the quasi-anechoic (employing close-miking of all woofers) frequency response of the 1028 Be L/R (purple trace), CC1008 Be center channel (green trace), 1008 Be surround (red trace), and SW 1000 Be subwoofer (blue trace). All passive loudspeakers were measured with grilles at a distance of 1 meter with a 2.83-volt input and scaled for display purposes.

The 1028 Be’s listening-window response (a five-point average of axial and +/–15-degree horizontal and vertical responses) measures +1.75/–1.84 decibels from 200 hertz to 10 kilohertz. The –3-dB point is at 48 Hz, and the –6-dB point is at 41 Hz. Impedance reaches a minimum of 3.72 ohms at 403 Hz and a phase angle of +48.30 degrees at 812 Hz.

The CC1008 Be’s listening-window response measures +1.98/–2.71 dB from 200 Hz to 10 kHz. An average of axial and +/–15-degree horizontal responses measures +2.06/–2.75 dB from 200 Hz to 10 kHz. The –3-dB point is at 57 Hz, and the –6-dB point is at 51 Hz. Impedance reaches a minimum of 3.60 ohms at 152 Hz and a phase angle of –68.71 degrees at 96 Hz.

The 1008 Be’s listening-window response measures +2.06/–2.58 dB from 200 Hz to 10 kHz. The –3-dB point is at 55 Hz, and the –6-dB point is at 49 Hz. Impedance reaches a minimum of 4.66 ohms at 200 Hz and a phase angle of –58.93 degrees at 93 Hz.

The SW 1000 Be’s close-miked response, normalized to the level at 80 Hz, indicates that the lower –3-dB point is at 31 Hz and the –6-dB point is at 29 Hz. The upper –3-dB point is at 161 Hz using the LFE input and the 50-Hz Boost set to +4 dB.—MJP

COMPANY INFO
Audio Plus Services
(800) 663-9352
ARTICLE CONTENTS

COMMENTS
chinito's picture

Hi Thomas

I bought these speakers except for the subwoofer. My question is do you think it's better to buy the Focal subwoofer or should I get another brand like the JL Audio Fathom 113?

Thomas J. Norton's picture
Much as I recall liking the Electra system, and how the subwoofer worked with it, we're now a year and a half down the road from the last time I heard that package. So I have to go by measurements and value. The JL sub goes almost an octave deeper, is smaller, costs over $1000 less (it's not captive to the currently weak dollar/euro exchange rate), comes from a company whose bottom line depends on its subwoofer sales, and includes an on-board Eq system while the Electra does not. In the Electra's favor is the fact that it cosmetically matches the rest of the system. I can't make the choice for you, but there you have it.
chinito's picture

Hi Thomas

Do you think the Onkyo TX-NR5010 have enough power to drive these speakers? My room size is about 4000 cubic feet.

Thank you
Chinito

donaldjordan's picture

Have you listed to the 1027s and how much would it differ with the 1028Be?

X