Outlaw RR2160 Stereo Receiver Review Test Bench

Test Bench

Two channels driven continuously into 8-ohm loads:
0.1% distortion at 144.7 watts
1% distortion at 165.1 watts

Two channels driven continuously into 4-ohm loads:
0.1% distortion at 188.5 watts
1% distortion at 235.3 watts

Analog frequency response:
–1.29 dB at 10 Hz
–0.42 dB at 20 Hz
+0.10 dB at 20 kHz
–0.83 dB at 50 kHz.

48 kHz PCM frequency response:
–1.30 dB at 10 Hz
–0.36 dB at 20 Hz
–0.27 dB at 20 kHz
–0.62 dB at 24 kHz.

1017outlaw.meas.jpg

This graph shows that the RR2160’s left amplifier channel, with two channels driving 8-ohm loads, reaches 0.1% distortion at 144.7 watts and 1% distortion at 165.1 watts. Into 4 ohms, the amplifier reaches 0.1% distortion at 188.5 watts and 1% distortion at 235.3 watts.

THD+N from the amplifier was less than 0.015% at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –74.46 dB left to right and –73.93 dB right to left. The signal-to-noise ratio with an 8-ohm load from 10 Hz to 24 kHz with “A” weighting was –96.76 dBrA.—MJP

COMPANY INFO
Outlaw Audio
(866) 688-5292
ARTICLE CONTENTS

COMMENTS
hk2000's picture

This thing ways more than many, many 7.2, even 9.2 channel AVRs out there. It has all the features anyone could need- including USB DAC which is very rare on home theater receivers. Any one know what it uses for internet radio? vTuner, Tune-in .... etc?

SharleneAiken's picture

An essay writing service can help you master how to write a visual analysis. Find expert guidance right here. Academic writing services are essential for improving your writing skills and achieving better academic results.

X