Revel PerformaBe Surround Speaker System Review Test Bench

Test Bench

The in-room measurements presented here were made using the Omnimic measurement system from Parts Express. The microphone was positioned at ear height and the speakers (and subwoofers) set up as described in the review. Measurements are for the left channel only and were 1/6th octave smoothed. The microphone was positioned for a single reading at ear-height in the listening chair. Prior experience has indicated that for my room and setup, multiple positioning averaging rarely does more than smooth out small ripples in the response curves.—TJN

720revel.Fig.1

Fig.1 F226Be, no subwoofers. Red: pre-pro Bass control flat. Blue: pre-pro Bass control at -6dB.

720revel.2

Fig.2 F226Be with two B110V2 subwoofers. Red: pre-pro Bass control flat. Blue: pre-pro Bass control at -6dB.

720revel.Fig.3

Fig.3 F226Be with two Revel B110V2 subwoofers in red (Extended mode off) and two SVS SB-3000 subs, in the same locations, in blue. Pre-pro Bass control at -6. Each set of subs were optimized using their on-board parametric equalization.

COMPANY INFO
Revel
(818) 895-3311
ARTICLE CONTENTS

COMMENTS
mtrot's picture

Seems like Revel tends to roll off the bass extension of their speakers, with the assumption that people will use subs. If you don't use subs, will the F228Be offer enough bass extension to be used without a sub?

PunchyRedcrown's picture

It seems to me that would be the case if he had to turn the bass down to -6, as he commented that this system seems to exaggerate a bass push. Were the speakers appropriately broken in? I have to ask because I wouldn't expect to have to make that kind of downward bass adjustment to top of the line Revels.

While I can understand using middling audio equipment on one hand, it seems to me the review might have been more telling had he used more price appropriate equipment. To me, I don't think you're going to pair a B bucket amp and a Marantz preamp to a $20k speaker system. I would have chosen something like an AVR 60 and the Parasound A51, which together gets you Anthem's award winning room correction. And I think is much better than what he used. With that in mind, you wouldn't have had to contend with an inferior Audyssey, which may have played a factor in the review. I didn't get a real sense of speaker greatness until the surprise at the end. Based on what I read, there would be no way I would pluck down $20k for that system- no way.

drny's picture

Revel's Be226 are actually a fairly priced, considering they are true hi-fi speakers. However the subs are overpriced considering their performance level. Additionally the Be126 are overkill for surround speakers, as such your observations on replacement subs and surrounds are completely valid.

Olaf the Snowman's picture

Time for TJN or AG to review the Performa top model F328Be :-) ......

Thomas J. Norton's picture
Most speakers of this size have difficulties in providing deep bass in a very large room. As noted in the review, when it comes to the bass extension and uniformity, the room is at least as important as the speaker. The larger Revels might have done better here, but since one or more subwoofers are nearly always part of a home theater system, a savings of $3000 in the system price will be a welcome tradeoff for many buyers.
Olaf the Snowman's picture

TJN or AG could review the Revel Performa F328Be and the NAD M33 together, and evaluate whether the built-in Dirac Live of M33 can modify/enhance the bass frequencies of the F328Be, without the assistance of separate subwoofers, in their listening rooms :-) ........

hk2000's picture

and made in China? No thanks!

X