- REVIEWS
Displays Electronics Speakers Sources Other Gear Software - TOP PICKS
- HOW TO
How To Buy How To Use Tech 101 - BLOGS
- NEWS
- FEATURES
- INSTALLS
Custom Installation - SUBSCRIBE
Piega AP-3 Speaker System and Arcam Solo Movie 5.1 System HT Labs Measures: Piega
Satellite Sensitivity: 85 dB from 500 Hz to 2 kHz
This graph shows the quasi-anechoic (employing close-miking of all woofers) frequency response of the AP3 satellite (purple trace) and PSub1 MkII subwoofer (blue trace). The passive loudspeaker was measured with grille at a distance of 1 meter with a 2.83-volt input.
The AP3's listening-window response (a five-point average of axial and +/–15-degree horizontal and vertical responses) measures +1.19/–5.02 decibels from 200 hertz to 10 kilohertz. An average of axial and +/–15-degree horizontal responses, in horizontal mode, measures +0.76/–4.83 dB from 200 Hz to 10 kHz. The –3-dB point is at 79 Hz, and the –6-dB point is at 67 Hz. Impedance reaches a minimum of 4.05 ohms at 260 Hz and a phase angle of –45.42 degrees at 98 Hz.
The PSub1 MkII's close-miked response, normalized to the level at 80 Hz, indicates that the lower –3-dB point is at 36 Hz and the –6-dB point is at 25 Hz. The upper –3-dB point is at 241 Hz using the LFE input.—MJP
- Log in or register to post comments
Displays Electronics Speakers | Sources Other Gear Software | Top Picks of the Year Top Picks | Custom Install How To Buy How To Use |
Tech 101
|
Latest News Features Blogs | Resources Subscriptions |
WHERE TECHNOLOGY BECOMES ENTERTAINMENT
AVTech Media Americas Inc., USA
All rights reserved