Other amp reviews in a similar timeframe that include bench testing also include THD, SNR, crosstalk etc numbers. It would be great to see those for the Legacy Audio Powerbloc2 and Powerbloc4.
Legacy Audio Powerbloc2 and Powerbloc4 Amplifiers Review Specs
Powerbloc2: Power Output: 325 watts per channel x 2 channels (8 ohms); 650 watts per channel x 2 channels (4 ohms)
Inputs: Balanced (XLR, 2) and unbalanced (RCA, 2)
Outputs: Gold-plated five-way binding posts
Dimensions (WxHxD, Inches): 17 x 3 x14
Weight (Pounds): 13
Powerbloc4: Power Output: 325 watts per channel x 4 channels (8 ohms); 650 watts per channel x 4 channels (4 ohms)
Inputs: Balanced (XLR, 4) and unbalanced (RCA, 4)
Outputs: Gold-plated five-way binding posts
Dimensions (WxHxD, Inches): 17 x 3 x14
Weight (Pounds): 15
Price: $1,800, $2,950
Company Info
Legacy Audio
(800) 283-4644
legacyaudio.com
- Log in or register to post comments
MJP, thanks for the nice review ... but a few things are off or odd.
1. The distortion specs you measured, though respectable, are 10x -20x higher than legacy specs. The spec 0.005% THD at rated output (325W) but you measured 0.1%, a 20x increase from their spec and yet this was never mentioned.
2. The measured output power at their rated distortion does not measure up to Legacy's specs.
3. Where are the SNR, Xtalk, IMD numbers?
Parasound uses the same class D modules in their ZM 2350 amp and their specs match these measurements. Legacy must've done something to skew their results!
While others are complaining about the extent of the measurements, I'm surprised and slightly relieved to see any measurements at all. It's been a while since S&V published any measurements. I hope you maker this the rule, and not the exception.