AV Receiver Reviews

Onkyo TX-NR3010 A/V Receiver HT Labs Measures

HT Labs Measures

Two channels driven continuously into 8-ohm loads:
0.1% distortion at 167.8 watts
1% distortion at 189.5 watts

Five channels driven continuously into 8-ohm loads:
0.1% distortion at 122.1 watts
1% distortion at 142.2 watts

Seven channels driven continuously into 8-ohm loads:
0.1% distortion at 114.1 watts
1% distortion at 127.2 watts

Analog frequency response in Pure Audio mode:
–0.05 dB at 10 Hz
–0.01 dB at 20 Hz
–0.02 dB at 20 kHz
–2.74 dB at 50 kHz

Analog frequency response with signal processing:
–0.14 dB at 10 Hz
–0.05 dB at 20 Hz
–0.43 dB at 20 kHz
–59.14 dB at 50 kHz

This graph shows that the TX-NR3010’s left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 167.8 watts and 1 percent distortion at 189.5 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 218.6 watts and 1 percent distortion at 257.1 watts.

There was no multichannel input to measure. THD+N from the CD input to the speaker output was less than 0.021 percent at 1 kilohertz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –78.11 decibels left to right and –86.80 dB right to left. The signal-to-noise ratio with an 8-ohm load from 10 hertz to 24 kHz with “A” weighting was –105.83 dBrA.

From the Dolby Digital input to the loudspeaker output, the left channel measures +0.04 dB at 20 Hz and –0.39 dB at 20 kHz. The center channel measures –0.02 dB at 20 Hz and –0.39 dB at 20 kHz, and the left surround channel measures –0.02 dB at 20 Hz and –0.39 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is –0.04 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 118 Hz and the upper 6-dB down point at 121 Hz.—MJP

Video Test Bench
The Onkyo TX-NR3010 passed all of our standard video tests (3:2 HD, 2:2 HD, MA HD—1080i in to 1080p out; 3:2 SD, 2:23 SD, MA SD—480i in to 1080p out; and Video Clipping, Luma Resolution, Chroma Resolution, and 3D passthrough—1080p in to 1080p out).—TJN

COMPANY INFO
Onkyo USA
(800) 229-1687
onkyousa.com
ARTICLE CONTENTS

COMMENTS
kent harrison's picture
Submitted by kent harrison on December 9, 2012 - 6:54am

Im impress with your review and it's features,but im waiting for your review the Denon4520ci receiver before i make a choice.

hyfynut's picture
Submitted by hyfynut on December 12, 2012 - 4:40pm

Shame they can't improve there reliability. We've had to stop selling Onkyo products ( Especially Receivers ). We sell mainly Yamaha ,Yamaha Aventage , Marantz. The Yamaha products have been top of the class in terms of dependability .

dodivino's picture
Submitted by dodivino on December 25, 2012 - 4:35am

Some absolutely abundant tips information. Thanks for the post buddy! healthbeauty1guide.com

dommyluc's picture
Submitted by dommyluc on February 2, 2013 - 8:39am

I recently purchased the Onkyo TX-NR717. It was the first A/V receiver I've bought in 10 years, to replace a JVC RX-8030VBK that I bought in 2003 but recently began shutting down randomly. I cannot believe I got the Onkyo for $500, which is basically what I had purchased my JVC for if you include inflation over the years. Since I am totally blown away by the performance of this receiver, I cannot even imagine what the TX-NR3010 must be like as a performer. Yikes!

X