AV Receiver Reviews

Five channels driven continuously into 8-ohm loads:
0.1% distortion at 83.3 watts
1% distortion at 91.5 watts

Seven channels driven continuously into 8-ohm loads:
0.1% distortion at 66.3 watts
1% distortion at 74.7 watts

Analog frequency response in Pure Direct mode:
–0.13 dB at 10 Hz
–0.03 dB at 20 Hz
–0.07 dB at 20 kHz
–2.77 dB at 50 kHz

Analog frequency response with stereo signal processing:
–0.52 dB at 10 Hz
–0.16 dB at 20 Hz
–0.24 dB at 20 kHz
–18.06 dB at 50 kHz

This graph shows that the AVR-2311CI’s left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 126.3 watts and 1 percent distortion at 154.3 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 154.6 watts and 1 percent distortion at 198.8 watts.

THD+N from the CD input to the speaker output was less than 0.005 percent at 1 kiloherzt when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –74.43 decibels left to right and –75.83 dB right to left. The signal-to-noise ratio with an 8-ohm load from 10 hertz to 24 kHz with “A” weighting was –112.12 dBrA.

From the Dolby Digital input to the loudspeaker output, the left channel measures –0.09 dB at 20 Hz and –0.32 dB at 20 kHz. The center channel measures –0.09 dB at 20 Hz and –0.21 dB at 20 kHz, and the left surround channel measures –0.10 dB at 20 Hz and –0.35 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is +0.09 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 96 Hz and the upper 6-dB down point at 116 Hz.—MJP