AV Receiver Reviews

Sony STR-DN1080 A/V Receiver Review Specs

Specs
Power Output: 7 x 100 watts (6 ohms, 2 channels driven)
Auto Setup/Room EQ: D.C.A.C. EX •Video Processing: 4K passthrough supporting HDCP 2.2, HDR, scales 1080p/24 to 4K (HDMI)
Dimensions (WxHxD, Inches): 17 x 6.25 x 13.15
Weight (Pounds): 20
Video Inputs: HDMI 2.0a (6), composite video (2)
Audio Inputs: Coaxial digital (1), optical digital (1); analog line-level stereo (4)
Additional: RJ-45 Ethernet; USB (front); IR-in/out
Video Outputs: HDMI 2.0a (2; 1, second zone-capable); composite video (1)
Audio Outputs: Zone 2 line-stereo; mono subwoofer (2); seven-channel speaker (plus Zone 2 stereo) on multi-way posts; ¼-inch headphone (front) )
Price: $600

Company Info
Sony
sony.com

NEXT: Test Bench »
COMPANY INFO
Sony
sony.com
ARTICLE CONTENTS

COMMENTS
latexii's picture
Submitted by latexii on November 12, 2017 - 3:12am

I have question.. all sony STR DN-XXXX models takes 240 wattage from "wall" and all of them output over twice that..

Seven channels driven continuously into 8-ohm loads:
0.1% distortion at 64.4 watts 1% distortion at 75.5 watts

Isnt 7 x 64w or 75w much over 240w ?

Could someone tell me how's this possible ? I mean Marantz 7011 takes 710w from wall and not even nearly output that same amount with same calculation

Have Sony invented solution for future coming energy crisis ? Could Sony sell me psu what takes 10w from wall and output is something like 1000w ? i could use it to keep my home warm...

bstryd's picture
Submitted by bstryd on November 20, 2017 - 4:27pm

I need to replace my old Yamaha AVR. In the price range I am looking at, it seems the Sony STR - DN1080 and the Denon X-2400H might be the best. I would love any input from Daniel Kumin or anyone else familiar with both. Thanks for any help.

xposivo's picture
Submitted by xposivo on February 22, 2018 - 2:55pm

I just bought my first 4k TV/Blu-Ray setup and sadly, my RX-V377 isn't HDCP 2.2.... After some research, I have found myself torn between the DN1080 and the X-2400H as well. Which did you choose?

rajugsw's picture
Submitted by rajugsw on March 28, 2019 - 5:39pm

Great receiver currently discounted everywhere. I replaced a Marantz SR5011 because Sony now supports DSD in 2.8MHz in 2.0 & 5.1 channels. Sorry folks, no 5.6MHz or 11.2MHz onboard DSD decoding. The STR-DN1080 downconverts to 176kHz/24 Bit. The workaround is hookup a Sony UBP-X1000ES (not the UBP-800X - same DSD decoding issues as the STR-DN1080N) and via Sony's proprietary encoding/decoding, you can play ALL DSD rates from the USB front port of both units. The onboard DAC (RCA left/right output jacks) are the only way to get true DSD playback without doing any messy PCM Downconversion. No DSD over PCM (DoP) support here either. It's Sony, so they don't need to sneak the packets onto PCM and then back into true DSD (I'm assuming).

One more thing (void goes the warranty). Open the chassis cover and you will see a ribon cable that leads from the top HDMI PCB down into the Main PCB BEFORE the ampifiers. With the aid of a STR-DN1050 schematic, I verified (ansd it's clearly labelled on the bottom header ANALOG GND, L+, L-, and the rest of the 6 main channels and the subwoofer channel. True differential outputs that bypass the internal volume control yet retain all D.C.A.C. EX functionality. A quality outboard preamp will allow you to use much better amplification than what built-in. Hi End AVR on a Low End budget.

Eh Sony...How's about an iOs App like the Marantz 2016 Remote App Huh ?

X